first sensor apd data sheet part description ad500-12 to order # 501163 version 02-08-13 features description application rohs 2002/95/ec absolute maximum ratings spectral response (m = 100) max 125 100 0.3 schematic electro-optical characteristics @ 23 c unit m mm2 na pf a/w ns ghz v v/k european, international sales: sales.opto@first-sensor.com sales.us@first-sensor.com x 2.0 0.15 first sensor agpeter-behrens-strasse 15 12459 berlin germany t +49 30 6399 2399 t r rise time m = 100; = 660 nm; r l = 50 0.35 f +49 30 639923-752 v br breakdown voltage i r = 2 a, v br - binning available f excess noise factor m = 100 usa: temperature coefficiant change of v br with temperature 60 excess noise index m = 100 0.2 90 120 cut-off frequency -3db, phase shift mode 2 3 4.5 i d dark current m = 100 0.3 2.0 responsivity m = 100; = 660 nm 45 50 t stg storage temp -55 c c capacitance m = 100 characteristic test condition t op operating temp -40 c m max gain (i p0 = 1 na) 200 ? laser range finder ? high speed photometry ? high speed optical communications ? apd with 0.2 mm2 active area ? optimized for 550 nm to 750 nm ? very high sensitivity ? high cut-off frequency symbol unit min circular active area apd chip with 500 m diameter. metal can type hermetic to52s1 package with clear glass window. ? medical equipment parameter ? ultra low temperature coefficient i peak peak dc current ma active area min diameter 500 active area 0.196 typ max symbol first sensor inc.5700 corsa avenue #105 westlake village ca 91362 usa t +1 818 706 3400 f +1 818 889 7053 0 10 20 30 40 50 60 400 450 500 550 600 650 700 750 800 850 900 950 1000 1050 1100 responsivity (a/w) wavelength (nm) pin 1 pin 4 pin 3
first sensor apd data sheet part description ad500-12 to order # 501163 version 02-08-13 quantum efficiency (23 c) capacitance as fct of reverse bias (23 c) multiplication as fct of bias (23 c) dark current as fct of bias (23 c) application hints: ? for low light level applications blocking of ambient light should be used ? for high gain applications bias voltage should be temperature compensated ? please consider basic esd protection while handling ? use low noise read-out - ic ? for further questions please refer to document "instructions for handling and processing" package dimension: small quantities: foam pad, boxed (12 cm x 16.5 cm) disclaimer: due to our strive for continuous improvement, specifications are subject to change within our pcn policy according to jesd46c. european, international sales: sales.opto@first-sensor.com sales.us@first-sensor.com ? current should be limited by a protecting resistor or current limiting - ic inside the power supply ca 91362 usaf +1 818 889 7053 t +1 818 706 3400 westlake village 5700 corsa avenue #105 first sensor inc. usa: first sensor agpeter-behrens-strasse 15 12459 berlin germany t +49 30 6399 2399 f +49 30 639923-752 0 20 40 60 80 100 400 450 500 550 600 650 700 750 800 850 900 950 100010501100 quantum efficiency (%) wavelength (nm) 0 10 20 30 40 50 60 0 10 20 30 40 50 60 capacitance (pf) reverse bias (v) 1 10 100 1.000 20 30 40 50 60 70 80 90 multiplication reverse bias [v] 1,0e-11 1,0e-10 1,0e-09 20 30 40 50 60 70 80 90 dark current (a) reverse bias [v] diode, protective circuit read-out circuit or f.e. 50 load resistance min. 0,1 f, closest to apd current limiting resistor bias supply voltage apd
|
